Dust collection is an important element in any woodshop. Craftsmen who have dust collection systems are better protected from health problems caused by breathing in dust, and their tools last longer. Dust collection comes in two main types positive and negative and each has its benefits. The positive collection uses a dust separator attached to the power tool, while negative collection has dust filters at the intake of the collector. Which one is better? If you’ve ever tried to do any DIY around the house, you’ve probably heard of collectors. These devices are essentially vacuums on steroids: they’re large enough to hold a lot more dust than a normal vacuum, and they have powerful motors that suck up every last speck of dust in sight. In this article, we’ll take a look at some of the best collectors available today, and help you decide which one is best for youBest Dust Collector

Our Top 3 Picks

#Top 1
Shop Fox W1666 2 HP 1550 CFM Dust Collector
Shop Fox W1666 2 HP 1550 CFM Dust Collector
- 17%
#Top 2
Shop Fox W1826 Wall Dust Collector, 2.5 Micron Filtration
Shop Fox W1826 Wall Dust Collector, 2.5 Micron Filtration
$297.00 $359.99 
- 18%
#Top 3
Jet DC-1100VX-5M Dust Collector, 1.5 HP, 1PH 115/230-Volt, 5-Micron Bag Filter Kit (708658K)
Jet DC-1100VX-5M Dust Collector, 1.5 HP, 1PH 115/230-Volt, 5-Micron Bag...
$749.99 $921.42 

What is The Best Dust Collector?

It’s a fact of life and something that all woodworkers have to deal with. No matter how well you design your shop or how well you’re building your latest project, at some point you’re going to need to clean up the dust and get it out of your shop. A good collector can make that job a lot easier. But, with so many different collectors on the market, how do you know which one is best for you? When you spend an entire day cutting and grinding, wood dust is going to get everywhere. You’re going to want to wear a mask or other safety gear to reduce your exposure; dust is bad for your lungs, and breathing it in regularly has long-term health consequences. Even when you aren’t “working,” you’re still going to be exposed to dust when you go to fix your tool belt, fix dinner, or do anything else. A collector is a unit used to collect dust particles from a particular area. Some collectors are portable and can be moved from one location to another depending on where it is needed. This is particularly useful for woodworkers and DIY enthusiasts who need to do specific jobs in different places. On the other hand, permanent collectors are typically mounted on the wall and are meant to be left in one location.

Top 10 Best Dust Collector Reviews

And if you’re looking for a good collector to help you fulfill your DIY needs, then pay close attention to our top 10 best collector reviews. These machines offer the right balance of power and versatility to help you polish projects to a fine shine. There are nearly as many different kinds of collectors as there are kinds of woodworking machines, but all collectors share one important commonality: they’re designed to keep your shop clean and safe. Collecting dust, debris, and chips from the machines you use to make your projects is the cornerstone of a dust collection system, and in many cases, the key to completing your projects efficiently.

The key to successful dust collection is a system that is properly fitted to the machines you use. You can have the most expensive collector on the market, but if it’s attached to a machine with a 1/4-inch dust port, you’re not getting the full benefits of your investment.

1. MelodySusie Nail Dust Collector

As a woodworker, you know how important it is to have a good dust collection system in the shop – but success in this area isn’t always easy to come by. I think it’s safe to say most woodworkers would love to have a collector that’s easy to use, easy to clean, and has enough power to keep you safe while working. A Collector is an invaluable tool to have in your workshop, and if you’re a serious woodworker it’s a tool you’ll find it hard to work without. It is basically a device that helps you suck up sawdust and other debris that would otherwise end up flying around your shop, which is both dangerous and annoying. There are two main types of woodworking collectors: cyclonic and bag-house. While both types will do the job, there are many differences between the two.MelodySusie 2 in 1 Nail Dust Collector with Nail Drill


  • It is a 2in 1 nail.
  • This router has a vacuum.
  • This router has a powerful nail driller.
  • It is a very durable router.
  • It is a reusable router.

Reasons to buy:

  • It is a really light weighted router machine.
  • It is very much efficient, sleek and a life saver.
  • It is pretty sensitive to touch which makes work easier.
  •  It files hard gel nails very easily.
  • It is a great E-File system.

Reasons to avoid:

  • The shipment is not available for Africa.


Related: Best Table Saw Fences System


2. JET 717520JCDC-2 Cyclone Dust Collector

The JET 717520JCDC-2 is a relatively inexpensive model, which is reflected in its mid-size build and relatively small dust bin. It’s perfect for people who have medium-sized workshops and only need to collect dust from table saws and routers, but it’s not built for professional use. It is an air filtration device that enables the collection of dust and other solid particulate material from industrial processes. The whole idea is to enclose the collector into a system, which collects the dust from the source and then cleans the collected dust. It can be divided into three main categories: bag, cartridge and cyclone. The JET 717520JCDC-2 is a cartridge type collector. It uses a cartridge filter bag, and a cartridge filter can be cleaned and reused easily. The JET 717520JCDC-2 is a self-cleaning filter.JET JCDC-2 Cyclone Dust Collector


  • This router has power of 2HP.
  • This router has a quick release collection drum.
  • This router machine has a double paddle cleaning system.
  • It has a remote controlling system.
  • It is a very Efficient router.

 Reasons to buy:

  • The drum collection is really great and big which collects up to 30 gallons.
  • The debris collection is so wonderful and it helps a lot.
  • The Swivel caster is really great which makes work easier.
  • It is a very quiet unit.
  • The suction is much better with the duct work.

Reasons to avoid:

  • The remote control got really tiny buttons.


Related: Best Home CNC Machine


3. Shop Fox W1666 Shop Dust Collector

The Shop Fox W1666 is a great choice for anyone looking for an affordable with a high CFM-to-dollar ratio. This reliable machine can collect dust from a 6-in. hose, so your shop vacuum can take care of the rest. It’s built to last, with a cast iron construction and a large collection bin that can haul up to 99 gallons of dust. It also has a two-stage filtration system, so you can ensure that your air stays clean. The Shop Fox W1666 is a collector that has a lot of different useful features that make it well-suited for a variety of jobs. It has a single stage filter bag, and it has a filter bag indicator on the body of the machine. This makes it very convenient to see when it is time to replace the bag.Shop Fox W1666 2 HP 1550 CFM

READ:   Best Hvac Gloves


  • Its paint is powder coated.
  • It has Heavy duty impeller
  • It has a 6-inch Inlet .
  • It has Quick release band clamp.
  • It is Steel base with casters.

Reasons to buy:

  • Includes safety switches to protect against unauthorized uses.
  • Airflow capacity is really great.
  • It can carry heavy work.
  • Its price is really reasonable.
  • It is really powerful.

 Reasons to avoid:

  • It is a bit heavier.


Related: Best 4×8 CNC Router


4. PSI Woodworking DC3XX Woodworking Dust Collector

Woodworking is a hobby that a lot of people enjoy, and it can be a great way to get rid of excess wood and turn it into something beautiful. But woodworking also makes a lot of mess: the dust from sawing, sanding, and staining can get all over everything in your shop. To keep your projects clean, you will need the right collector. The PSI Woodworking DC3XX is a powerhouse of a unit. It’s an industrial machine, intended for use with heavy loads and large tools. If you feel like you’re having trouble keeping your workshop dust-free, this is the tool for you. For those that work with wood for a living, the process of making wood furniture and other wood projects can get a little messy. Wood dust, sawdust, and other debris are bound to be created when you are trying to shape wood into usable pieces.PSI Woodworking DC3XX


  • It has 1.5 HP.
  • It contains Portable collector.
  • Bags are not included in it.
  • Hose are not included in it.
  • It is wonderful for the woodworkers.

Reasons to buy:

  • It is faster to work.
  • It is great for laser etcher fumes.
  • It lasts nearly forever.
  • It is at a reasonable price.
  • It is a compact system to fit under anywhere.

Reasons to avoid:

  • It is used for DIY applications only.


Related: Best Wood Router For Beginner


5. Powermatic PM1300TX-CK Dust Collector for Home

Powermatic PM1300TX-CK is the best in the market for people who build. It will help you remove the dust from your work area, leaving the area clear and breathable. This product is very simple to use, with the only thing you need to do is to plug it into the wall. This product will also save you the money you spend going to a professional to help you out with your DIY projects. While there are power outages and other issues that you can’t control, you can take steps to keep dust in check. For example, when you’re working on a woodworking project with power tools, it’s important to switch off the power and clean up the mess before heading home for the day. This will prevent airborne dust from accumulating in the air, potentially causing breathing problems for you and anyone who lives in your home.Powermatic PM1300TX-CK Dust Collector


  • It has 1.75 HP.
  • It contains a 2-micron canister kit.
  • Remote control is included in this router machine.
  • Turbocone features are available in this machine.
  • Collecting bag capacity is really high on this router machine.

Reasons to buy:

  • It contains more than five years of warranty.
  • Canister filter provides more than six times the filtering surface area of             standard bags
  • It is really powerful.
  • It is manually easy to follow.
  • Its unit is wonderful and moves a ton of air.

Reasons to avoid:

  • The remote only works when we are in front of the collector.
  • There is no radio signal mode.
  • The suction will collect the nut or screw but the blower part will not pass it through to the collection bag.
  • There is a chance for larger chips to get stuck.


Related: Best Circular Saw Blade


6. BUCKTOOL Wall Mount Collector

When you’re looking for a collector for dusts, you’ll find there are hundreds of options available. Among these, you’ll find that not all are created equal. Some are going to provide you a lot of bang for your buck, while others are going to fall short–and cost you extra money and time in the long run. BUCKTOOL is a relatively new brand, but they seem well established in the market. Their collector is one of the best selling products on the market. The product is small, but has a functioning capacity of 12 gallons, which is decent considering the cost. It is also very quiet, which is a definite plus. However, the thing we really like about the product is the safety features. There is a safety switch that prevents the machine from running unless the dust co 5 lbs in weight.550 cfm airflow capacity.BUCKTOOL 1HP 6.5AMP Wall-mount


  • It has a 5 amp motor.
  • lter bag is present in this.
  •  4 inches hose are present in it.
  • It contains a 2-micron filter bag.

Reasons to buy:

  • It is really light weighted.
  •  It has a really moderate price tag.
  • It is a really trustworthy brand.
  • It does not make any kind of noise.
  • It has great units.

Reasons to avoid:

  •  Its warranty information is not available.


Related: Best Compact Router


7. The Dust Deputy Deluxe for Small Shop

The dust deputy is one of the best investments you can make in a small shop. Dust collection is the number one problem in small shop woodworking and the dust deputy does it better than any other portable. When anyone asks me what I got for Christmas or my birthday, I tell them to get a dust deputy and a few filters. Keep your filters clean and your shop free from flying debris with the Dust Deputy. The machine works by sucking air from your collector and ejecting it into a large garbage bag that sits outside your shop. Not only does this help keep your shop cleaner, but it also prolongs the life of your filters. The Dust Deputy Deluxe is a small shop designed for use with small shop tools and equipment.The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit


  • It has a 5 gallon kit.
  • Its suction power is increased.
  • It Has a long lifespan.
  • It is Portable designed router machine.

Reasons to buy:

  • It is manufactured very nicely.
  • It works flawlessly.
  •  It is super-efficient.
  • It collects bigger dusts.
  • It saves the filter of the vacuum cleaner.

Reasons to avoid:

  • It does not fit the hose.


Related: Best Electrician Tool Belt


8. SHOP FOX W1685 wood Dust Collector

When it comes to wood collectors, Shop Fox W1685 is the best one to invest in. The Shop Fox W1685 helps to eliminate dust, while allowing both large and small pieces of wood to pass through, keeping the air clean. Not only that, the Shop Fox W1685 helps to protect your lungs from the wood dust that can be harmful. SHOP FOX W1685 wood Collector is a great product. It is one of the Shop Fox’s top of the line collectors. Wood dust is a major safety hazard for woodworkers, affecting the whole family, and inflicting serious risks for house fire, lung disease and cancer. While most dust collection systems are sold with a single filter bag, large shops will need multiple filtering bags of various sSHOP FOX W1685 1.5-Horsepowerizes to trap the different dust from different machines. In short, most wood shops will need a collector.

READ:   Best Rolling Tool Bag


  • This router has a 10 amp motor.
  • This router’s speed is 3450 motor rpm.
  • This router has the capacity of 1280 cfm airflow.
  • It has a “Y” shaped inlet.
  • It has the function of 4 inches opening for inlet.
  • It has the function of a 12 inches impeller.
  • It has a Safety switch.
  • It contains a 5-micron dust collection bag.
  • It is 108 lbs in weight.
  • It has a 2 years of warranty.

Reasons to buy:

  • Long warranty period.
  •  Airflow capacity is really great.
  •  It can carry heavy work.
  •  Its price is really reasonable.
  • It is really powerful.

 Reasons to avoid:

  • It is a bit heavier.


Related: Best Rolling Tool Bag


9. Rousseau 5000 Dust Collector

The Rousseau 5000 has long been known as one of the best to help you conquer even the toughest jobs. The Rousseau 5000 is a top-of-the-line collector that can take care of even the toughest jobs, and it promises the best value, speed, and performance available on the market right now. It offers all the standard features you would expect. The Rousseau 5000 also offers a variety of features that set it apart from the competition, such as the included cleaning brush and the dual-filter system with a pre-separator and a separate HEPA filter. We’re thrilled to see that a growing number of manufacturers are now addressing the dust collection needs of shop owners. The new Rousseau 5000 collector is a good example of this. This means it should keep the air in your shop cleaner, and reduce the amount of dust and airborne debris that ends up all over your finished projects and workshop.Rousseau 5000 Dust Solution for Miter Saws


  • It Reduces IrritationGreatly.
  • Drastically Shortens Clean Up Time.
  • Pops-Up For Easy Installation.
  • Hood Comes Fully Assembled.
  • Designed Specifically To Capture.
  • Dust Generated By Miter Saws.
  • Compact Hood Size And Shape For.
  • Use With All 10″ Miter Saws.
  • Interior Baffle Prevents Escape Of.
  • 4” O.D. Vacuum Port.
  • No Hood Assembly Required.
  • Mounting Stanchions Included.

Reasons to buy:

  • It makes your workshop great.
  • The construction is really strong.
  • It catches 99% dust.
  • Everything is well contained in the unit.
  • The hood holds up amazing.

Reasons to avoid:

  • There is no adapter to connect the vacuum with the hood.


10. Grizzly Industrial G1163P Dust Collector:

The Grizzly Industrial G1163P is a 1 HP collector that is powerful enough to handle most small- to medium-sized woodworking shops and with its powerful motor, it is enough to handle the toughest dust-collecting tasks. The Grizzly Industrial G1163P (or G1163P for short) is a popular choice for hobbyists and small-time contractors with high demands on their dust collection system. It collects dust from two ductwork outlets and seals that dust in a 3-gallon tank, making cleanup a breeze. These are a must for every woodworker who wants to do more than just the basics. They help you get rid of the dust that traps your sawdust, sanding dust, and everything else that flies around in your shop, so you can get a clearer view of your work.Grizzly Industrial G1163P


  • It has an 8amp motor.
  • 500 cfm airflow capacity.
  • It has a 9 inches impeller.
  • It contains30-micron bag.
  • 56 lbs in weight.
  • 1 year of warranty.
  • Steel Base with Casters for Mobility.
  • White Powder Coated P.
  • Quick-Release Bag Clamp.
  • Paddle Switch with Safety Key.
  • Smooth Rolling Casters.
  • Single Stage Dust Bag.
  • Convenient Handle.

Reasons to buy:

  • It has a really powerful motor.
  • Its airflow capacity is best in class.
  • It has a paddle safety switch with a removable key.
  • It’s painted in white powder coat.
  • Its base is made of steel.

Reasons to avoid:

  • Warranty period is short.


How to choose the best dust collector?

When it comes to keeping your workshop clean, a collector is a must-have. Not only does it keep your work environment much cleaner, but it also keeps the air inside your workshop much cleaner. Of course, not all collectors are created equal, so it is important to take the time to ensure that you are choosing the best collector for your needs. To help you make that decision, this article will cover some of the things you will need to consider before you choose your new collector. Dust collection is a key part of the table saw’s appeal. The best collectors allow you to use your saw in your garage, workshop, or even your basement without worrying about fine wood dust being spread through the air. There are a lot of choices on the market, so how do you choose the right one for you? The following guide will be your best bet at choosing the right dust collecting capacity for your needs.

1. Airflow capacity

Dust is a major contributor to poor indoor air quality and is usually a result of improper ventilation. It is a device used to filter, or capture dust, and contain it for disposal or recycling. It comes in several forms, including a cyclone, venturi, or dust cabinet. They are basically filters for air flow. They control dust by removing it from the air stream before it reaches the other components of a ventilation system. When It is designed to handle a certain amount of air flow, there are many ways to measure this air flow capacity.

2. Filter efficiency

The dust created by cutting some materials may be harmful to health. For example, the dust may consist of hard particles of metal, stone or wood. Some dust may be generated in the workshop. This may be wood dust from the work of carpentry or moulding, or the dust of sanding/polishing and grinding. As it may contain harmful substances, it is often desirable to collect and contain the dust. For this purpose, collectors are used. These may be connected to the machine’s exhaust. In this case, they can be placed outside the workshop. Its efficiency is the measure of the fraction of the dust that has been removed by the collector.

3. Portability

While a portable collector can be useful for smaller jobs, it’s important to note that they aren’t nearly as effective as stationary collectors. Stationary collectors have much more power, and can handle more square footage. That’s because a stationary collector needs a much larger motor to run a hose and exhaust all the air in a building. A portable collector has a much smaller motor, meaning it can’t move as much air. As a result, a portable collector needs to be run in shorter bursts, and used in smaller areas. Portable collectors are a great alternative to their larger and more expensive counterparts. They are easy to move around because they don’t have to be mounted to a wall and they can be used in smaller areas. On the other hand, they still have the built-in benefits of larger collectors, such as the ability to hook up to a larger collector for a bigger job.

4. Motor Power

A dust collector is a machine that is used to control sawdust, chips and waste material from getting into the air that should not be there. This is used in Joinery, woodworking, cabinet making and other types of shops. There are a lot of types and models of collectors, but the most common are the positive pressure collectors and the negative pressure collectors. The positive pressure collectors work the same way as the vacuum cleaners do and they suck the air, which is loaded with the sawdust, chips and waste, through the filters. This is an important part of power tools, especially in woodworking. It is a machine that is responsible for collecting all the dust that is produced when the saw is cutting. It is a very helpful device, because it makes it possible for us to work in a clean area without having to do all the cleanup after it’s done.

READ:   Best 4 In 1 Garden Multi Tool

5. Noise of operation

In order to ensure that dust collection equipment is properly maintained, it is necessary to carry out regular maintenance and address any problems that might arise. For example, if a noise is heard when the collector is running this could be the sign of a problem with the bearings in the fan motor of the unit. Bearing wear can be monitored by checking the current draw of the motor and noting if there is an unusual increase in the current. If there is such a change then the bearings may need to be replaced.

 6. Warranty

The most common reason in warranty is if the tool is not able to do what it is supposed to do, for example, if you are looking to purchase a tool for cutting, but it does not cut well, then you may require a refund. You can also ask for a refund if the tool fails to do what it is meant to do after a few months of use, or if there is an error in the instruction manual that does not allow you to use the tool.

Dust collection system:

If you are a woodworker who makes a lot of dust, then it may be time to buy a dust collection system. This is a device that is used to collect dust generated by woodwork projects. If you are a professional, then this is a must have item. The problem with a collector is that it can be very costly and may not be worth it for smaller projects. You could use a shop vacuum to remove dust and debris from your shop. However, the volume of dust created by a table saw, jointer, router, or sander can fill a shop vacuum’s bag so quickly that it’s impractical to use a shop vacuum for dust collection. An alternative to a shop vacuum is a collector. This uses a blower (usually an electric motor) to move air through a filter, which traps most of the dust before the air exits through a flexible hose. Some collectors have a secondary filter that collects fine dust that can get through the primary filter. These filters can be washed out periodically to remove the collected dust. Many woodworkers don’t mind the dust in their shops since they find it easy to clean up. Perhaps that’s because they haven’t tried using a dust collection system that can suck up the dust and keep your shop tidy. Even if you’re one of those woodworkers who doesn’t mind dust, you’ll find a dust collection system is worth the investment.


What Is A Dust Collector Used For?

A collector is a device that is used to clean dust from a workshop, factory, or home. Using it is a great way to keep dust particles from settling on your work area, your machines, and in your air. They are also used to keep the air that is in your home clean. They can be used in a variety of different ways. Some people use collectors with their workshop, while others use it to keep dust out of their air. You can also use a collector on your vacuum. Using it with your vacuum will help to keep the air in your home clean. You can also use a collector while you are cleaning. This will keep dirt from collecting on the floor.

Which Dust Collector Is The Best?

Dust collection is a big part of running a woodworking shop. I mean, wood is made up of lots of tiny little fibers, right? If you don’t clean them up, you’ll wind up with a nasty mess. It’s kind of like when you vacuum your carpet. Can you imagine if you didn’t clean up the hair, dirt, and dust on the rug and just left it there? Soon you’d have a giant hairball on your floor. The same thing happens when you don’t clean up all those tiny wood fibers. They pile up into big clumps. The Shop Fox W1727 is the best of all.

How Do You Make A Homemade Dust Collector?

The idea of building a collector can be daunting if you are a beginner. The idea of building it can be daunting if you are a beginner.  However, it is not an activity meant for the novice.  If you have experience in building wood projects, this project is not a challenge.  If you are a beginner, you can build this project if you have the right plans. Besides there are many online video tutorials on making it at home.

How Much Is A Dust Collector?

A woodworking shop can be a fun place to spend your free time. You can take pride in knowing that you built the furniture you need for your family. However, this hobby can also be expensive. You have to purchase the wood and the tools necessary to build the furniture you want. If you are looking for a way to save money, you need to think about some of the ways it can help you in your woodworking tasks. They are priced between 30$ to 256$.

Can I wash my dust collector bags?

It depends on what kind of collector you have (a cyclone or a shop vac), and what kind of collector bag you have.If you’re a woodworker that uses a collector, you should know the importance of replacing your collector bag on a regular basis. Bags can be a pain to change, though, and some people wonder if it’s okay to wash their bag instead of replacing it. You can wash the collector bags with the following steps:

  • Wash your dust collection bag in the washing machine.
  • Rinse the bag out using clean water, in a bathtub or a utility sink.
  • Wash your bag with a mild detergent.
  • Gather the dust collection bag and hang it to let it dry.

Final Verdict:

Whether you’re a professional woodworker or just someone who enjoys a DIY project from time to time, investing in a collector is a crucial step in ensuring your safety and the quality of your work. The collector is not an easy task. We have collected the most important things that you need to know about collectors, so read on. We wrote this guide with a desire to help you find the best collector for your home. We put together a list of what we think are the features you should take into consideration when choosing a collector for your home. For a long time, collectors have been used to remove dust particles from the air. Over the years, the technology has been improved, and now you have an opportunity to buy collectors that are more efficient and affordable. SHOP FOX W1685 is the best of all. Hope you like our blog and let us know your comment.

Similar Posts