Best Drill Bits For Drilling Out Locks

Best Drill Bits For Drilling Out Locks

Drilling out locks is a common occurrence. It happens when you have lost your key or the lock has been broken. If you are in this situation, you will need to drill out the lock. You can do this with a drill bit that is designed for this purpose. You can find these at any hardware store and they will cost you a few dollars. Drill out the lock using the drill bit and then use a hammer and chisel to remove the lock. You will need to be careful when you are doing this, you need to make sure that you protect your fingers by using the chisel and hammer. You should be able to remove the lock in about 20 minutes. Once the lock is removed, you will be able to remove the door bars. These will be attached to the wall, so you will need to use a crowbar to remove the screws that are holding them to the wall.

 

1. IRWIN 10-Piece Screw Extractor and Drill Bits For Drilling Out Locks

The Irwin 10-Piece Screw Extractor and Drill Bits For Drilling Out Locks is a set of tools that can be used to remove screws and other objects from a lock without any damage to the lock.  The Irwin 10-Piece Screw Extractor and Drill Bits For Drilling Out Locks can also be used to drill out locks without any damage to the lock. The Irwin 10-Piece Threaded Extractor Set For Drilling Out Locks, Stripped Screws, and Other Hard-to-Reach Fasteners is an extractor that can be used to remove screws that cannot be easily removed. The Irwin 10-Piece Threaded Extractor Set For Drilling Out Locks, Stripped Screws, and Other Hard-to-Reach Fasteners includes a 3/8-inch extractor that can be used to remove screws. 

 

Key Features

• Intended to eliminate broken studs, fasteners, attachment screws, and fittings
• Forceful left-hand twisting plan for extra holding power
• Simple out style winding woodwinds implant themselves to expand hold as obstruction increments
• Extractor size and suggested boring apparatus size are carved on each instrument
• Set incorporates winding woodwind screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5; bore sizes 5/64″, 7/64″, 5/32″, 1/4″, 19/64″, and a metal record case

 

Specifications

• Material Cobalt
• Brand Irwin Tools
• Thing Dimensions LxWxH 4.5 x 6.9 x 0.9 inches
• Device Flute Type Spiral

 

Pros 

• IRWIN boring tools highlight a forceful plan for additional power. The bore chomps into materials with expanding force while boring out the lock and creates much more latch-eliminating power. For simple recognizable proof, sizes are scratched onto each lock boring apparatus.

 

Cons

 

• The bore works brilliantly on locks. Nonetheless, a portion of the pieces is weak. The pieces might dull rapidly on hard metals, and opposite pieces are helpless against breaking.

2. Werkzeug 20 PCS Drill Bits For Drilling Out Locks

The locksmith’s drill bits are the most important tool in his toolbox. They are the key to unlocking any lock, no matter how complicated.  But what happens when the locksmith runs out of drill bits? It’s a nightmare, that’s what.  Luckily, this mobile drill bits set comes with a box full of extra bits for your drill. And you can get it for $13.99 at Lowe’s. . Product info: 4-piece, mineral matrix composite bit set Medium shank fits most cordless drills Patented, one-piece design Up to 12x longer life; replaceable bit tips. For drilling into wood, plastic, and soft metals. Ideal for use with cordless drills. High performance, high-speed steel for high strength and durability. Drills are faster and cleaner than standard twist drills. 

 

Key Features

• Focus Drill Bit: Werkzueg focus drill is made of fast steel bore and extinguishing treatment shell planned. High hardness, tough, and unrivaled penetrating execution
• Fulfill all you request: Hinge drills come in 8 unique sizes: 5/64′, 7/64”, 2 of 9/64”, 11/64”, 13/64”, 5mm and 1/4″. With 1 hex key and 8 substitution bores
• Incredible Design: Automatic situating focus upgrade exactness and effectiveness. Twofold sided opening plan quick and programmed release sawdust from the opening on the two sides
• Multipurpose: Perfect for pivots, handles, cabinet slides, carpentry, and so forth Reasonable for experts and DIYer
• Significant: Use low speed when penetrating (as a rule keeps in 2000r/min to 3000r/min). Too quick speed will askew, break the piece or stuck

 

Specifications

• Knife Type Hex
• Cutting Angle String 135 Degrees
• Brand Werkzeug
• Device Flute Type Spiral

 

Pros 

• Werkzeug 20 PCS All-Purpose Set is a completely utilitarian arrangement of efficient bores in addition to matching extractors in a very much planned box. They are worked to suit all sizes and shapes and are really durable. The all-inclusive hurl and one-use activity make this set a well-meriting part of a tool compartment.

 

Cons

• However this set incorporates assortments of bores, the nature of pieces is sketchy. Few may not work that well on hard metal and are powerless against breaking.

3. VSILE 6-PIECE Drill Bits Set for Locks

Are you looking for the best drill bits for locks? Well, you’ve come to the right place!  This drill bit set by VSILE is perfect for your next DIY project. With this set, you’ll be able to drill through any lock without any problems. . This set is a bargain at this price, so don’t miss out any longer. . From the manufacturer: FREE BONUSES – Drill bits in the aluminum carrying case with five-day money-back guarantee, lifetime warranty, and free lifetime tech support. 5/32″ – 3/8 ” steel, wood plastic, and ceramic. With a handle for easy use. Use with a variable speed drill. Manufacturer’s Limited Lifetime Warranty. From the manufacturer.

 

Key Features

• 6 Piece gold screw extractor set: The screw extractor set(0,1,2,2,3,4) works with any drill and any size screw or bolt. This harmed screw extractor can eliminate all normal sizes of damaged, stripped, or broken screws.
• Material: This harmed screw remover toolbox is produced using fast amalgam steel, tough for extricating stripped, broken, stuck, or harmed screws.
• Step-by-step instructions to utilize: Please introduce a bolt extractor on the fundamental electric hand drill rather than a hammer drill. Also, opposite use in the entire interaction when stripping the harmed screw-in low speed, to ensure you would not get injured.
• Compact to store: The screw remover set accompanies a fundamental toolbox box, advantageous to place it into your sack or go outdoors.
• Application: The fastener extractor set works with drill and screw or fastener. Reasonable for hexagon attachment fasteners, square head screws, wood screws, hexagon head screws, mechanical screws, sheet metal screws, and different screws.

 

Pros 

• VSILE bore and screw extractor set work on any harmed, broken, or locked screws. Two simple applications complete the undertaking. Its super-speed steel and hardness of 63-65HRC guarantee the toughness and strength of this lock drill set.

 

Cons

• This bore set serves simple activities. Nonetheless, a few pieces are piece delicate for a few hard screws.

4. NEIKO Left Hand Locksmith Drill Bit set

NEIKO Left Hand Locksmith Drill Bit set  NEIKO is a brand that has been around for a long time. In fact, they have been around for over a hundred years. They have been a trusted name for locksmiths and their products. So it’s no wonder that their WL-120K Wall Mounted Digital Lock Keypad is one of the most popular in the country. The touchpad is very easy to install and can be mounted anywhere along with the door. It can integrate with almost all sorts of access control systems and can also be used to open doors. Their WL-320K is a little different, as it is an aluminum keypad instead of a wall-mounted one.

 

Key Features

• [APPLICATION]: Extraction bits effectively eliminate broken screws, studs, fasteners, and different fittings adequately
• [DURABLE]: Left-gave boring tools are produced using cobalt strengthened high-velocity steel for expanded toughness and administration life
• [DESIGN]: Spiral woodwinds on screw extractors dive into the screw, expanding hold as force is applied
• [CONVENIENCE]: Stored in a solid metal list conveying case for association and capacity with all measures that are obviously named
• [INCLUDES]: Sizes: Bits – 5/64″, 7/64″, 5/32″, 1/4″, 19/64″ and Matching Alloy Extractors – #1, #2, #3, #4, #5

 

Specifications

• Material Cobalt
• Knife Type Threaded
• Brand Neiko
• Thing Dimensions LxWxH 5.67 x 4.49 x 0.79 inches
• Apparatus Flute Type Spiral

 

Pros 

• The NEIKO bore set is exceptionally solid for its cobalt-strengthened fast steel development. Twisting woodwinds guarantee additional hold and proficiency. The metal record conveying case is efficient and simple to store.

Cons

• A few bores may not work proficiently on unpleasant or hard surfaces. They will quite often get dull after a couple of utilizations. Be cautious while opening or shutting the case; the bores might drop out of the case.

 

5. ALLmuis 4-Pieces Drill Bits For Door Locks

Do you want to know how to pick a lock?  You are in luck. This article will teach you how to pick locks.  The first step is to find the right tools. You will need a pick, a tension wrench, and a key.  The second step is to familiarize yourself with the basic principles. This will help you feel comfortable and confident when you have to pick a lock. The third step is to learn the process. You should read about basic lock picking and try picking some unlocked locks. This will help you learn how to pick a lock and it will prepare you for the next step. This will help you feel comfortable and confident when you have to pick a lock.

 

Key Features

• APPLY TO ALL DRILLS: 4 pieces screw extractors work with any drill and all the screw sizes or fastener (3-12mm), These extractor apparatuses are utilized to invert the harmed screw counterclockwise until it is delivered
• Strong: Striped screw extractor eliminates even the most difficult stripped, harmed, implanted, rusted, and covered up screws and fasteners
• Simple TO USE: Just two straightforward advances will take care of business – Use an appropriate size screw remover to bore an opening with slicing size and it’s not difficult to separate the screw or fastener utilizing an extractor device
• HARDNESS 63-65HRC: Higher hardness material and is tougher than most screw extractors in the market, the hardness, and the sturdiness are superior to other people, Buy with certainty and complete inner serenity
• Guarantee: Essential Tools stripped screw extractor is upheld by our 3 Tier 100 percent Money-Back Guarantee, If you are not happy with the item, you can return the item for a full discount with no issue

 

Pros 

• The high-velocity steel and 63-65HRC make the bores hard and dependable. The solid and strong pieces work with any drill and battle triumphantly with any impediments. Its simple application permits penetrating out any difficult entryway lock easily.

Cons

• The nature of the piece and its winding cut is problematic. I may not nibble profoundly while penetrating.

 

6. IRWIN: Drill Bits for Drilling Out Locks 

You’ve locked your keys in your car, your bike is locked up outside the bar, and the lock on your briefcase has broken. You’ve tried everything, but you can’t seem to pick the lock. What do you do?  You could always drill it out with an electric drill and then pry it open with a screwdriver, but that’s going to be noisy and it might damage the finish on your door. You know what, you’re a real pro, and you’re in this just for the money. You know that the key is to not damage the original lock. You also know that it’s not worth the time and money to get it rekeyed, So you check out the situation and realize that the key is a pretty easy one to duplicate. So you call a locksmith friend of yours to see if he has a copy of the key.

 

Key Features

• Turbomax tip takes out “strolling,” begins penetrating on contact, and stays sharp longer
• Produced using premium high-velocity steel with dark and gold completion for added consumption obstruction
• Accuracy ground math gives top tier opening size exactness
• Incorporates 1/16″ to 1/2″ sizes by 64ths and a decreased knife on bits bigger than 3/8″

 

Specifications

• Material High-Speed Steel
• Brand Irwin Tools
• Thing Dimensions LxWxH 10.38 x 4.75 x 2.88 inches

 

Pros 

• You can easily utilize the IRWIN bore for the evacuation of broken fasteners, studs, fittings, and screws. It gives additional power due to its forceful plan. 

Cons

• Despite the fact that the IRWIN bore guarantees extraordinary toughness, you might view a portion of the pieces as delicate and powerless.

 

7.  DEWALT Cobalt Drill Bit Set with Pilot Point

 

Let’s get to work.  DEWALT Cobalt Drill Bit Set with Pilot Point  If you’re an avid DIYer or contractor, you know that there are a lot of tools that are important to have in your arsenal. One of the most important tools that you need to have is a drill. That is why we have the DEWALT DCD780C2 20V MAX XR Li-Ion Brushless 3 Speed Hammer Drill. It is the most powerful drill on the market that is why it is our top pick. One of the most important features of this drill is the fact that it is cordless. If you are in need of a cordless drill, you will have to buy this one.

 

Key Features

• Connectable adornment stockpiling framework to advance extra room of boring apparatus for wood, metal or I-radiates
• Licensed piece bar configuration permits simple expulsion of boring apparatus and adjustable situation
• DEWALT boring tool set accompanies clear cover permitting you to handily see substance at look
• Cut hook for secure shutting
• Little Bulk Storage size fits inside the Small and Medium ToughCase+ (sold independently) – Ideal for getting sorted out free pieces
• Greatest speed and life in hardened steel and other hard metals
• PILOT POINT tip begins on contact for spotless, exact openings and decreases lock-up on forwarding leap

Specifications

• Material Cobalt
• Brand DEWALT
• Thing Dimensions LxWxH 8.75 x 1.74 x 8.75 inches

 

Pros 

• Made of excellent cobalt
• Uses PILOT POINT tips
• Offers clean cuts
• Really exact
• Has a protected brit-bar plan

 

Cons

• A portion of the more modest pieces are weak
• Doesn’t work that well on stirred metal

 

8. IVY Classic Cobalt Steel Drill Bit Set

There are many reasons that you should buy this drill bit set.  The first reason is that it is made of cobalt steel. This is a much stronger material than the other drill bits that are made of brass. This means that you will be able to drill through much harder materials and you will be able to drill much deeper into the ground. The second reason that this drill bit is so good for drilling through very hard materials and through the ground is because it has a larger diameter than other drill bits that are on the market. The larger diameter means that the drill bit can get through the material much faster than the other drill bits. This will allow you to get the job done much quicker. 

 

Key Features

• Solid plastic case with pieces and sizes obviously noticeable
• Merchant length drills intended for penetrating hardened steel, hard steel, wood, and plastic
• Accuracy ground, gold-completed Cobalt Steel endures scraped spot and holds hardness at high temperatures
• 135-degree split point for a quick entrance and exact self-focusing
• 5-Piece Drill Set incorporates: 1/8, 3/16, 1/4, 5/16, 3/8-Inch boring apparatus

 

Specifications

• Material Cobalt
• Cutting Angle String 135 Degrees
• Brand IVY Classic
• Thing Dimensions LxWxH 6 x 2.7 x 0.8 inches

 

Pros 

• Five set choices are accessible
• Can go through various kinds of metal
• Fit for opposing scraped areas
• Ready to endure high temperatures
• Have 135 degrees parted point

 

Cons

• Incorporates an unstable case
• Covering doesn’t keep going long

 

9.  Drill America Reduced Shank Cobalt Drill Bit

If you’re looking for drill bits, you’ve come to the right place. Drill America has reduced shank cobalt drill bits made for drilling in the toughest materials, like cast iron, steel, and even titanium.  Do you need a drill bit that can drill through cast iron? We have those as well as bits that can drill through steel, brass, and even aluminum. . You can find drill shank cobalt bits that can drill holes from .005″ to .375″. If you’re looking for drill bits that drill holes in cast iron, steel, brass, and other hard materials, you’ve come to the right place. We offer a wide variety of high-quality industrial drill bits and tools, making it easy for you to find the exact drill bit you need for your project.

 

Key Features

• Cobalt steel devices are like high-velocity steel, however with more cobalt for further developed execution when cutting more earnestly metals, for example, hardened steel or nickel compounds
• Gold oxide is a more slender oxide surface treatment than dark oxide ordinarily used to recognize cobalt steel devices; execution is like uncoated apparatuses
• Round knives permit use with a wide assortment of tool holding frameworks
• At the point when run in a counterclockwise bearing (right-hand cut) twisting fluted devices clear chips up and out of the slice to lessen stopping up
• Made to National Aerospace standard 907

 

Specifications

• Material Cobalt Steel
• Cutting Diameter 0.75 Inches
• Finish Type Gold Oxide
• Knife Type Round
• Cutting Angle String 135 Degrees

 

Pros 

• Accessible in 41 unique sizes
• Can turn very quick
• Has a gold oxide treatment
• Uses a 135 degrees split point tip
• Productively empties the chips

 

Cons

• Covering focuses on lovely without any problem
• Dulls somewhat rapidly on hard metals

 

10. LudoPam Cobalt Drill Bit for Hardened Steel

Allow us first to discuss the general development of the units. These use 5% cobalt steel to get a high-velocity trademark. That implies boring out a lock on a file organizer will take significantly less measure of time. Likewise, the material is great, which makes the units extraordinarily tough. Aside from being exceptionally sturdy, the material holds the capacity to oppose heat. Indeed, the hotness obstruction capacity is effective in that it will scarcely overheat, regardless of whether you are working for a drawn-out measure of time. It can likewise oppose scraped areas extraordinarily well, which will additionally expand the life expectancy.

 

 

Key Features

• Excellent MATERIAL: 5% Cobalt High-Speed Steel M35 gives stretched instrument life contrasted with standard drill bits. Durable, Higher Heat and Abrasion Resistance.
• Exact 135°SPLIT POINT and TWIST DESIGN: Prevent strolling, clear chips and particles quicker.
• Proficient and WIDELY USE: M35 Cobalt HSS is more reasonable for solidified material. Especially effective in slicing through hard metals, for example, hardened steel, cast iron, high-temperature amalgam, a titanium compound, hard plastics, and woods, and furthermore can be utilized for milder materials.
• Focus on speed, strain, and hotness control during penetrating.
• INCLUDE: 10 bits of 1/8-Inch cobalt bores

 

Specifications

• Material Cobalt High-Speed Steel
• Finish Type Titanium
• Cutting Angle String 135 Degrees
• Brand LudoPam

Pros 

• Developed of tough cobalt
• Turns rapidly
• Exceptionally impervious to warm
• Can oppose scraped spots
• Highlights a 135 degrees split point

Cons

• A portion of the sizes are excessively wide
• Pieces are relatively short

 

Conclusions

A locksmith has a lot of different tools at their disposal. One of the most important tools is a drill. A drill is a tool that is used to create holes in objects. A drill bit is a specific type of drill that is used to create a hole in a specific object. . There are many different types of drill bits, and they are used to create holes in a number of different types of materials. Drill bits are created in a number of different sizes, which makes it possible to use the same size drill bit for different objects. These bits come in varying diameters, which are measured in millimeters and are used to measure the size of the hole that is going to be drilled.

Frequently Asked Questions

1. What drill bit do you need to drill out a lock?

 

Switch to either a larger 3/4 inch (19 mm) drill bit or a specially made cylindrical tubular lock bit. Tubular lock bits are generally 3.75 inches (9.53 cm) and similar to hole saws used to drill larger holes for installing locks indoors. Drill through the entire mechanism. This will destroy the entire lock.

2. What kind of drill bit do I need to drill out a broken bolt?

What Size Drill Bit Should I Use? Try a small size drill bit first, but don’t drill out to remove broken bolts only what comes out. Drill as much as possible, then go to the next larger size. Start at 1/8 inch and work your way up.

3. What is the toughest drill bit for metal?

 

Cobalt (HSCO) is considered an upgrade from HSS because it includes 5-8% Cobalt blended into the base material. This is a great option for drilling into harder steel as well as stainless steel grades. Carbide (Carb) is the hardest and most brittle of the drill bit materials.

4. How do you drill Thule locks?

Remove the plastic lock cap and expose the metal keyhole and lock barrel. Position the drill bit into the dead-center of the metal barrel. Carefully bore out the lock cylinder. Take great care to go in straight and not drill the plastic edges of the cargo box.

 

5. What is the HSS drill bit?

HSS drill bits, an acronym for high-speed steel drill bits are extremely hardwearing and particularly well designed for drilling into metal surfaces, as they are much more resistant to the heat generated from the fast speed operation. … HSS bits can be also be used for drilling wood and plastic materials.