Multimeters, often known as ohm reader, are used to test a wide range of electrical equipment in the house. It’s a must-have item in any electrician’s toolkit, since it aids in troubleshooting, testing, and repairing electrical devices. They may also be used to ensure that your vapers, rebuildable dripping atomizers (RDAs), and cartomizers are safe. Choosing the appropriate multimeter might be challenging because there are so many options on the market.

Not only should you choose one based on its quality and your money, but also on your requirements, capabilities, and safety. Below you will find the reviews of some of the top options so that you can pick the best ohm reader for your requirements.

Best 10 Ohm Reader

1. AEMC 2126.53 1000V Digital Megohmmeter

A new grading box is being developed that will allow for accurate grading of a variety of different size levels.  The DC Series Dual Mast level grading box is a new innovation in the grading box industry. It has been designed to allow for accurate grading of a variety of different size levels. and is available in sizes ranging from DC500 to DC3000. The new Dual Mast level grading box is the only level grading box on the market that is specifically designed to grade the largest diameter sizes of round, small square and rectangular steel. beams, up to a maximum 500mm width.

Key Features

• Megohmmeter in its purest form
• 250V, 500V, and 1000V insulation test voltages are available.
• For timed measures up to 15 minutes, use the EST LOCK function.
• After the insulation test, the device will automatically discharge.
• 600VAC/1000VDC AC/DC Voltmeter

Pros

• Simple to use
• Excellent cables
• Affordable
• Lightweight

Cons

• Low Ohm rating
• Flimsy

Specifications

2. LEAGY VICTOR VC60B+ Digital Megohm Meter

The VC60B+ Digital Megohm Meter is the best way to measure the resistance of your circuit. This meter has a wide range of measurement and can measure up to 60 megohms. This is a must-have for any hobbyist, student, or professional. The VC60B+ includes a test lead set to wrap your circuit and test, as well as an instruction manual. 

Key Features

• With an accuracy of (4% of reading +2 digits), you can measure up to 2000M 1000V.
• Data hold and auto power off are available on the large LCD display (84.8*59.8mm) with backlight.
• Display “1” if the range is exceeded.
• At unload, the power usage is less than 300mw.

Pros

• Auto shutdown
• Large LCD
• Low power consumption

Cons

• The battery is not included in the package
• Instructions that are poorly drafted

Specifications

3. Etekcity MSR-R500 Digital Multimeter 

The Etekcity MSR-R500 Digital Multimeter is perfect for anyone with an interest in electronics.  The Etekcity MSR-R500 Digital Multimeter is perfect for anyone with an interest in electronics. This multimeter is a great way to get started with electronics , even if you’re not an expert! The build quality of this multimeter is alright, but it feels a little cheaper. than other multimeters on this list. The display is easy to read and it’s very easy to use. The entire multimeter is powered by a 9V battery, which is included.

Key Features

• AC/DC Voltage, DC Current (Not for AC Current), Resistance, Diode, Continuity, and More can all be tested with this multimeter. 3 times per second sampling rate
• PERFECT TROUBLESHOOTER: A big backlit LCD with large numerals is easily visible in dimly light areas; a built-in support stand allows for hands-free use; Continuity buzzer and low battery indication
• SECURITY: The multimeter incorporates overload protection on all ranges, as well as anti-burn with double fuses. Extra drop protection is provided by a protective rubber sleeve around the multimeter.
• AC current cannot be tested with this multimeter. During use, make sure the rotary switch is set to the correct range.

Pros

• Auto-range
• Safety protection
• User-friendliness
• 9-volt battery is provided

Cons

• Only a manual range is available
• measuring capacity is limited
• No AC measurements are available

Specifications

4. AstroAI 2000 Counts Digital Multimeter

This is a review of the AstroAI 2000 Counts Digital Multimeter!  The AstroAI 2000 Counts Digital Multimeter is a great way to measure voltage, current, and resistance. It is accurate to 2000 counts and has a backlit LCD display. It also has a variety of safety features to protect you from electrocution. This meter can measure resistors, diodes, transistors, temperature, and capacitance. It also measures AC and DC voltage, including 60Hz and 400Hz. It can measure current up to 100A. This meter can measure AC and DC voltage from 0-600V up to 3kV. It can also measure AC and DC current up to 1A. It can measure resistance up to 20MΩ. It does not have capability to measure frequency or capacitance.

Key Features

• AC/DC Voltage, DC Current, Resistance, and Diode are all accurately measured with this VERSATILE DIGITAL MULTIMETER. This multimeter is a fantastic tool for resolving electrical problems in the workplace and at home. Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Car Electronics Testing, and other applications.
• TROUBLESHOOTING WITH ACCURACY – This multimeter includes a 2 second sampling rate, a backlit LCD display with 3 12 digits (1999 count) 0.6″, and high polarity including negative and positive readings.
• ENSURES SAFETY – Anti-burn double ceramic fuse protects against overloading.
• The silicone cover can protect the multimeter from malfunctioning and electric shocks. When the battery power is low, a low battery indicator will appear.
• EASY TO USE – Data Hold, low battery warning, and continuity buzzer are all supported. It’s easy to use in low-light environments thanks to features like the LCD Backlit Screen. Included are a battery, a set of test leads, and a user manual.
• ADDITIONAL TIPS – This multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It’s a good tool for DIYers and hobbyists who want to do some home or commercial modifications.

Pros

• Auto shutdown
• A rubber sleeve
• Quite precise
• Easy to use
• Includes a user-friendly manual

Cons

• AC won’t be tested 
• There’s a problem with the wire protection

Specifications

5. Fluke 1507 Digital Megohmmeter

The Fluke 1507 Digital Megohmmeter is one of the most precise measuring devices available. This device is widely used in both industrial and commercial settings to measure the resistance of wires, cables, and other electrical components. These electricians use this  to detect and locate defects in electric circuits and to determine if electrical wiring is up to code.

Key Features

• The remote test probe makes repetitive or difficult-to-reach testing simple.
• For increased user protection, live circuit monitoring prohibits insulation testing if a voltage greater than 30-Volts is detected.
• The wide, lighted display makes it simple to read measurements.
• Automatic polarization index and dielectric absorption ratio calculations save time and money.
• With the Compare (Pass/Fail) feature on the 1507, you can make repetitive tests straightforward and easy.
• The remote test probe makes repetitive or difficult-to-reach testing simple.
• For increased user protection, live circuit monitoring prohibits insulation testing if a voltage greater than 30-Volts is detected.
• The wide, lighted display makes it simple to read measurements.

Pros

• Insulation up to 10 giga ohms is tested.
• Features that compare and lock
• Test leads and probes are included.
• On the illuminated screen, measurements are easily read

Cons

• Neither a case nor a carry bag are included.

Specifications

6. Fluke 116/323 HVAC Multimeter

A digital multimeter, a clamp meter, and an integrated thermometer are included. A digital multimeter is included in the Fluke 116/323 HVAC combo kit. Hidden electrical faults can be diagnosed using diagnostic instruments. Humidity, stress, and drops are all protected by multimeters.

One of the key benefits of the 116/323 is accurate recording. It also has numerous dependable techniques for producing reliable data, such as electrical resistance, capacitance, continuity, and frequency. The Fluke 116/323 comes with a generous 3-year warranty.

Key Features

• Ergonomics in design
• Thermometer built-in
• LED lighting for the backlight
• Microamperes
• Low input impedance

Pros

• It displays brightly
• A wonderful design
• The accuracy of the readings

Cons

• Expensive

Specifications

7. Crenova MS8233D Digital Multimeter 

Do you need a voltmeter that may be used on industrial, residential, and laboratory equipment? The Crenova Auto-ranging Digital Multimeter is an excellent choice in this case. This very portable multimeter comes with a durable meter. Because of its ergonomic design, it is feasible to operate it with just one hand.

This display incorporates digital technology as well as abundant lighting. The device can also operate with both direct and alternating currents.

Key Features

• Assurance of 100 percent safety There’s a built-in double fuse. On all ranges, there is Overload Protection.
• Accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, and more with the Auto-ranging Tester.
• Backlight Display Designed with a 3-1/2-digit LCD display with ‘Backlight,’ the reading is easily visible in low-light conditions.
• ‘Special Notes’ Data Hold, Maximum Value Hold, Function Switching, and Auto Power OFF are some of the features available. 3 times per second sampling rate
• REMEMBER TO INSTALL THE 9V BATTERY BEFORE USING THE DIGITAL MULTIMETER; if you don’t, it will go on strike.

Pros

• Foldable stand
• Auto-shutdown
• Bags for transport
• It’s a crisp and portable display.
• Use with caution.

Cons

• It may be difficult to read measurements taken at certain angles.

Specifications

8. VC60B+ Digital Megohmmeter

There are numerous reasons to believe this instrument to be the greatest volt ohm meter. This meg ohm meter provides the accuracy of a trustworthy instrument in various applications, in addition to having a wide test range. Whether you’re a seasoned pro or a novice, this tool will serve you well. The anti-magnetic and anti-jamming functions of the megohm meter ensure that the device runs smoothly.

Aside from comprehensive function protection, the gadget has a design that protects against high-voltage circuit risks. There’s also an alert that goes off if there’s a high voltage or short circuit input, protecting both the user and the integrity of the megohm meter.

Key Features

• Wide test range, accurate and dependable
• Anti-magnetic and anti-jamming properties are strong.
• Anti-high-voltage circuit design with full function protection
• Alarm for high voltage and short circuit input
• The LCD display is large and illuminated, making it easy to read. Easy-to-use unit symbol display

Pros

• High accuracy
• Smooth performance
• Easy to read LCD display
• Convenient

Cons

• Alligator clips do not stay in place.

Specifications

9. Extech 380580 Battery Powered Milliohm Meter

This milliohm meter, which comes in a suitcase-like box, is as handy as they come. It weighs 1.5 kg in total, so you’ll be able to carry it around with you wherever you go. It’s also ideal for field use thanks to the bundled attachments.

The instrument provided exceptional precision through precise measurements during the first several testing. Two sets of test leads are included in the kit, as well as AA batteries for optimal operation. These have a 4-wire construction with four alligator clips, as well as a bonus 4-wire with two Kelvin alligator clips.

Key Features

• Portable Milliohm meter with high accuracy and resolution for field use
• Four Kelvin readings at the end
• 5 ranges with a maximum resolution of 100 Ohm for over-temperature and over-voltage protection
• Invalid test indicators lead to erroneous measurements.

Pros

• Highly accurate
• Easy value readings
• Plenty of protection
• Invalid test indicators

Cons

• It’s not as handy as a handheld meg ohm meter.

Specifications

10. KAIWEETS TRMS 6000 Digital Multimeter 

This device can do it all thanks to its 6000 counts auto-ranging measures. Among other things, it can test AC/DC voltage, current, frequency, liquid temperature, and battery monitoring. This tool’s superior technology makes it suitable for automotive, industrial, and domestic use.

This item is exceptional in every way. The leads are simple to connect, ensuring quick and precise measurements. Furthermore, the huge 2.9-inch LCD display includes a dual design that displays an additional bar graphic for improved readings.

Key Features

• Multimeter monitors up to 600V AC/DC voltage, 10A AC/DC current, and 60 MOhms resistance, as well as temperature, capacitance, frequency, duty-cycle, wire on-off, and test diodes and continuity.
• Simply turn the dial to the desired function, and the LED lights on the jacks will turn on. It’s simple to connect the leads. You don’t have to worry about figuring out the value range to use because autoranging does it for you. The 6000-count resolution is displayed on a large 2.9″ LCD backlight display with easy-to-read numerals.
• Includes non-contact voltage testing as well as a live function with sound and light alarms. The back-lit flashlight makes it easy to operate in low-light situations. To keep track of signal fluctuations, use the Min/Max/Average formula. Stable kickstand, back-mounted pen slot, low-battery warning, data retention, and auto power-off
• Anti-Burn features a thermistor protection circuit and a double ceramic fuse. All ranges have High Voltage Protection turned on. The unit is double insulated. It is protected from falling harm by a silicone protective case.
• KAIWEETS offers a 36-month after-sale service as well as lifetime technical support. If you have any questions or issues, please do not hesitate to contact us. Multimeter, test leads, thermocouple, batteries, and user manual are all included in the package.

Pros

• Large screen
• Dual display design
• Optimal readings
• Easy to operate
• Sturdy probe clips and stand

Cons

• The viewing angle is a little strange

Specifications

Conclusion

Ohm readers are extremely useful at home and in the field since they can be used to test a wide range of defective electrical devices. Finding the best ohm meter among a plethora of alternatives might be difficult. That is why we have hand-picked ten of the best and compiled a comprehensive assessment of them all. We hope this information assists you in finding the right one for you.

Frequently Asked Questions

1. What is a good ohm reading?

The meter should indicate either OL or a flashing 1 depending on the type of LCD display (both mean off limit). To measure the lead resistance, connect the test probes together. Normally, a good set of test leads should measure around 00.1 Ohm (that is one tenth of 1 Ohm).

2. How do you check ohms on a vape?

Set your multimeter’s ohms to the lowest level, which is usually 20 or 200. Place one probe on the positive pin (the one in the middle of the 510 connection) and the other on the outside 510 threading on the atomizer your coil is in to determine the total resistance of the coil in the atomizer.

3. How many ohms should a 12 volt coil have?

A resistance value of at least 3-4.5 ohms is required. A faulty coil will give you a reading of more than 3-4.5. Next, connect the red or black lead from the meter to the coil’s center and one of the positive or negative terminals. 9500-10000 Ohms is the target; a bit less is acceptable, but not more.